Deal of the week 15% Off
Free U.S. Shipping
Showing 7 items

Quick Links

Red Katana
Gold Katana
Blue Katana
White Katana
Black Katana
Brown Katana
T10 Steel Katana
Folded Steel Katana
Manganese Steel Katana
Clay Tempered Katana
Shirasaya Katana
Katana Set
Aluminum Katana
Anime Katana
Wooden Katana
Price Under 199 USD Katana

FAQs

A katana is a Japanese sword characterized by a curved, single-edged blade with a circular or squared guard and long grip to accommodate two hands. 


The katana is generally defined as the standard-sized, moderately curved Japanese sword with a blade length greater than 23.86 inches. It is characterized by its distinctive appearance: a curved, slender, single-edged blade with a circular or squared guard and long grip to accommodate two hands.


Western historians have said that the katana was among the finest cutting weapons in world military history. 

Having a regular cleaning routine in place is key to maintaining your katana. 


You can purchase a traditional sword cleaning kit that will have everything you need. There are three steps: removing oil, polishing the blade, and oiling the blade. 


Using a sheet of rice paper from the kit or soft cotton cloth, remove any oil that is still on the blade from the previous maintenance. Take the powder ball and tap it lightly against the blade about every two inches or so along its length. Take a fresh piece of rice paper and rub the powder over the blade to polish it. Do this until both sides of the blade have been polished and the powder completely removed. Take the bottle of oil and apply a few drops along the length of the blade on each side. Use a fresh piece of rice paper to spread the oil evenly on the blade.

The most iconic and well known of all the Samurai swords; the katana is distinguished by its long blade and handle that is made to accommodate two hands and strike from a large distance. It has a curved, slender, single-edged blade with a circular or squared guard. The katana has a set of dimensions that separate it from other samurai swords. A traditional katana will measure 3 to 4 feet in total length, with the hilt taking up one-fourth of the total and a characteristic curvature of more or less than 1 inch. 

A full tang katana is the sword where the tang extends to almost the whole length of the handle, which makes the blade and the handle the same piece of metal. This gives to the sword certain rigidity and makes it a very solid piece to enjoy.


Full Tang Katanas are handmade swords. They can be made of various stainless-steel types according to the Carbon Concentration. The forging is the essential part of the production because it allows the Samurai Sword to be solid and relatively light. Commonly, the piece of metal is repeatedly heated by fire and hammered while the metal is being folded. The mounting of the different parts is a very delicate operation that has its origins deep in the Japanese civilization. Samurai are used to cherish their Katanas as their trusted partners, and they handle them with love and care. 

Clay tempered Katana are swords made according to a particular process of blade reinforcement. During the forging, there are steps to go through involving several steps and some compounds mixture, used by the entire sword’s forger, yet each has his own formula. The compound mixture is none but Clay recipe that each forger has a secret ingredients list. The Clay tempering is supposed to be an art more than a sword works. Clay tempered Katanas are said to be more resistant and durable. Clay treatment must be operated by professional to be efficient. Also, each steel type is supposed to be responsive to different clay composition. 


Traditionally, Carbon Steel is obtained by firing up a particular type of charcoal within a Clay Tub for approximately 72 hours. Iron powder should be added at determined amounts to associate appropriate quantity of Carbon. At the end, the obtained Steel is Stainless; its solidity depends on the amount of Carbon that associates to Iron. The steel obtained is referred to by four digits number which designates Carbon by the two first digits and the percentage of Carbon within the steel. Thus, 1045 Carbon steel refers to Carbon steel material that contains 0.45% Carbon fraction. It is called Medium Carbon Steel as well because that carbon concentration is the minimal required for the Steel to be used for industrial purposes; there are lower concentrations of carbon, but the materials are not suited for industrial use. 1045 Carbon Steel is suited for making Katanas because it is cheaper than the other materials used for this industry. It is softer and easily forged. The proper application of the hardening techniques and the Clay treatment, certainly produce amazing steel that can be forged in real pieces of arts.


1060 Carbon Steel is a high carbon steel. The number 1060 refers to a material made of an alloy of Iron with a Carbon tenor of about 0.60%. Other’s elements can be found mixed to this alloy, but their tenors are not very significant. 1060 Carbon Steel Is harder than 1045 Carbon Steel; this property makes this steel harder to forge. The high Caron tenor makes the 1060 Steel more durable, but it is not high enough to compromise its pliability. The swords made of 1060 Carbon Steel keep their edges sharp longer and they are more expensive. It is the favorite steel material of famous swords companies.


1060 Carbon Steel Katanas inherit the durability and the hardness of the steel material. 1060 Carbon Steel Katanas require more effort to produce. The edge is durable, and the sharpness lasts longer. It is more resistant to corrosion and oxidation and therefore requires less maintenance processing than the 1045 Katanas. Though, it is very important to clean the blade and polish it after every extensive use to ensure the durability and the sharpness, and to keep the edge “healthy”. 1060 Carbon Steel Katanas are expected to be heavier than those made of 1045 Carbon Steel, because of the steel properties. These Katanas create curves while being forged. This is the property of high and medium Carbon Steels: they keep a certain softness which makes them to develop ideal curves  during the clay tempering processes and folding operation. The differential hardening and the folding operations, which are meant to harden the blade can increase the weight of the piece; this situation is handled by an aesthetically implanted blood groove that help eliminate the extra weight but keep the resulting spine from the differential Clay Tempering process.


1060 Carbon Steel Katanas have the medium rank between 1045 and 1095 Carbon Steel Katanas. It appears that they are appreciated for their durability, their hardness and for their affordable price if compared to properties. The easiness of forging reduces dramatically the price of the 11060 swords and makes them very popular.


1060 Carbon Steel Katana is customizable from the forging to the mounting processes. You can chose the Hamon type, the sharpness of the edge, the hardening type and even the forging process. 1060 Carbon steel is hard steel but it is susceptible to hand forging, special press mechanical devices and to milling by dedicated machinery. Opting for 1060 Carbon Steel material is to choose low price material that can be forged into resistant and valuable pieces.

1095 Carbon steel is carbon steel that contains 0.95% of Carbon. Actually, it is called very high carbon steel. This carbon percentage results in a hard steel, which hardly forged by hands. The heat treatment must be conducted delicately because the carbon tends to leak at certain temperature and if improperly heat treated.


Heat treatment is to be operated very carefully because it is a delicate operation: improper treatment can result in loss of the carbon fraction and therefore the non-obtaining of the martensite, which can result in the loss of the whole material. The 1095 Carbon Steel comes to be softer than the Stainless Steel, yet it is easier to handle, durable and more resistant. But among the Carbon Steels, 1095 is the hardest and perhaps the best choice for making swords intended to last longer while being roughly and frequently used.


The Carbon element makes the obtained steel relatively resistant to oxidation even if it has no chromium to be considered stainless. Although, the acquired durability which excels the durability of the Stainless Steel, makes Carbon Steel more preferred for making Swords.


1095 Carbon Steel Katana inherits the hardness and the toughness of the Carbon Steel material. The Swords are intended to regular use and very frequent Dojo cuts. For outdoor displays and shows, 1095 Carbon Steel Katanas are more suitable than the 1060 and 1045 Carbon steel Katanas; the last one is already preferred when it is about decorative use. The hardness of the Steel makes the forging process into sword a tough operation and increases the price value of the resulting piece, if handmade. This characteristic induces an excellent durability for the 1095 Carbon steel Swords. The durability and the Edge Sharpness are reinforced by the Differential hardening process. It is important to notice that Clay tempered 1095 Carbon Steel Katana are resistant to corrosion and are more resistant to oxidation; they are perhaps stainless. These swords are easier to sharpen and they do not need to have a thick layer of what the swords men call “meat”; the edge keep its sharpness for long time.


The hardness of the 1095 Carbon Steel Katana is inherited from the Steel material used for the forgery. Actually, forging Katanas fusing 1095 Carbon Steel appears to be harder than forging swords from others Carbon Steel types. Thus, the price of a 1095 Carbon Steel Katana tends to be higher.


Although 1095 Katanas are tougher than the others Carbon steel Swords they are still susceptible to abrasion and to corrosion if they are not properly cleaned and carefully maintained. Thus, applying cleaning process and using the recommended oil and tools to proceed may augments the durability of the edges and keep the 1095 Carbon Steel katana’s properties for long time.


The toughness of the blade, which allows it to be the favorite choice for frequent functional use, may require particular pieces to mount on the blade to form the final Katana. Already, the Carbon steel type has imposed the forging process.


1095 Carbon Steel Katana are full tang katanas because of the hardness of the material and its resistance to shocks which require a tough handle mounted on a tang that is solid enough. Differential Clay Tempering results in a hardening the edge and keeping the spine softer, this operation may increase the durability of the edge and enhances the resistance to corrosion, therefore the edge will support the frequent dojo cut and outdoor display.

Customer Reviews

Jaden Myles Massachusetts, United States
Jul 23, 2021 16:14

Epicly punctual and I am never disappointed every time.

Handmade Pattern Steel Red Blade Japanese Katana Samurai Swords With Brown Scabbard
Verified Purchase
Angela Lloyd Texas, United States
Jul 13, 2021 09:30

Fast delivery and very well made sword , was a gift for my son he loved it

One Piece Roronoa Zoro Sandai Kitetsu Katana Samurai Sword Replica With Red Scabbard
Verified Purchase
Tyler M Somerville Pennsylvania, United States
Jun 30, 2021 09:30

The craftsmanship on the tanto is great. The weight and balance are very good and it looks exactly as advertised. The only thing holding me back from a 5 star review is that the blade is not secured in the wooden sheath and will slide out from gravity. A good addition would be a piece that holds it securely in the sheath. Otherwise great quality and very much worth a purchase!

Handmade High Manganese Steel Blue Blade Short Katana Japanese Tanto Swords With Blue Scabbard
Verified Purchase
Evette Fedd New Jersey, United States
Jun 28, 2021 18:50

Love the katana. The blade was craft beautifully and it’s well balanced. I love the fact that it has a good weight to it. I named this beauty Yozora.

Handmade Blue Plated Blade Real Katana Japanese Samurai Sword
Verified Purchase
Aidan Riney Texas, United States
Jun 28, 2021 12:45

Overall a fantastic product. It had good shipping time and the product itself is good quality for the price. My one critique is that the scabbard’s leather bubbled at the top and created air pockets in between the wood and the leather.

Handmade Manganese Steel Real Black Japanese Ninjato Ninja Swords With Leather Scabbard
Verified Purchase
Shane Moore Florida, United States
Jun 11, 2021 21:32

I cannot recommend these swords enough! Within the first day of the ownership of a new tanto I had accidentally sliced through my leg requiring 13 staples. Not only did the doctors say it was the cleanest cut they had ever seen but it didn’t even bleed until I was in the car on the way to the ER. It’s a true testament to these swords quality and and ability I wish I could give them more gold stars.

Handmade Black Real Japanese Tanto Wakizashi Samurai Swords
Verified Purchase
Isaiah New Mexico, United States
Jun 08, 2021 20:42

Love it nicely made and beautiful thanks will definitely buy again

Handmade Manganese Steel Blue Blade Lightning Theme Real Katana Samurai Swords
Verified Purchase
Jocabed Gomez Hernandez Minnesota, United States
Jun 05, 2021 22:57

The katana was as the description and picture showed. It’s beautiful and it came with no damage. The delivery was not that long of a wait.

Hand Forged Full Tang Blue Blade Dragon Tsuba Real White Katana Samurai Swords
Verified Purchase
John Fernando Florida, United States
Jun 05, 2021 09:53

It was awesome! Definitely buying another. Sharp, pristine quality

Extra Long Handle Emerald Theme Full Tang Handmade Katana Japanese Samurai Sword
Verified Purchase
Ronald Johnson Virginia, United States
May 23, 2021 06:10

Very beautiful and detailed craftsmanship. Love this for practicing Iai draws. Do not expect to use this as a bokken! The katana is very light and is not intended for dueling. However, is very nice as a showpiece or for simply practicing draws. I am extremely satisfied with this sword and the attention to detail. I am definitely interested in adding more to my collection. Shipping was laggy but very worth the wait. I highly recommend this to anyone learning Iai or just wants something cool to display.

Handmade Practice Wooden Bokken Japanese Samurai Katana Swords With White Scabbard
Verified Purchase