2 Tier Sword Stand
Two-tier sword stands in this collection are solid hardwood display pieces providing a double-level horizontal format for any two Japanese swords. Available in table-top configuration with black lacquer finish and a stable weighted base, these stands present a katana pair or daisho set in the correct traditional orientation. Free shipping and a 30-day return policy are included.
Free Shipping
39.00 USD
Free Shipping
39.00 USD
Free Shipping
59.00 USD
Free Shipping
49.00 USD
Free Shipping
49.00 USD
Free Shipping
29.00 USD
Free Shipping
139.00 USD
Related Collections
Katana Display Stand78 items
Sword Table Stand78 items
Single Layer Sword Stand78 items
Samurai Swords Stands78 items
Frequently Asked Questions
Is a 2-tier sword stand large enough for two full-length katana?
Yes. A standard 2-tier sword stand is sized for full-length katana as its primary use case. Full-length katana typically measure 95 to 115 centimeters overall in their saya, and the stands in this collection are proportioned to accommodate this length range on both tiers. The peg span on each tier - the distance between the two horizontal support points - is set to support a katana at the correct balance positions. The base width and depth are proportioned to keep the stand stable under the combined load of two full-length katana in their saya, which represents approximately 1.5 to 3 kilograms total. Both tiers are sized identically, so two katana of similar length sit symmetrically on the stand. For a daisho - one katana and one shorter wakizashi - the shorter sword sits comfortably on the lower tier within the same peg span used for the katana, with the sword extending only partway to the outer peg position.
What is the visual difference between a 2-tier and 3-tier sword stand in a display?
A 2-tier sword stand and a 3-tier stand differ in visual weight, height, and what they communicate about the collection. A 2-tier stand is compact and focused - it presents two swords in a tight, composed arrangement that emphasizes the relationship between the pair. The stand's overall height is moderate, fitting comfortably on most display shelves without dominating the space. A 3-tier stand is taller, heavier, and reads as a collection rather than a pair. It has more visual presence in a room and occupies more vertical space on a shelf. The 2-tier stand suits a collector who displays a specific pair as a featured piece; the 3-tier stand suits a collector who wants to show a grouped collection of three swords as a unified display. For rooms or shelf areas where display scale matters, the 2-tier stand is the more versatile choice - it can be placed in tighter spaces and remains proportionally appropriate even in small rooms where a 3-tier stand might be visually overwhelming.
How do I decide which sword goes on the upper and which on the lower tier?
The traditional convention for placing two Japanese swords on a 2-tier stand assigns the upper tier to the longer sword and the lower tier to the shorter. This derives directly from the daisho convention where the katana - the longer sword - occupies the upper position and the wakizashi the lower. The practical reason is stability: the longer and typically heavier sword on the upper tier produces a slightly higher center of gravity, but it also means the more prominent sword is in the more visible upper position, which is the correct visual hierarchy for the daisho tradition. For two swords of similar length, the upper tier is the more prominent display position and conventionally goes to the sword you consider the primary or more significant piece - the one you would show first if explaining the collection to someone. If the two swords are truly equivalent in significance, placing the one with the more visually striking saya on the upper tier often produces the more interesting display.
Can a 2-tier sword stand be stored flat when not in use?
A 2-tier sword stand can be partially or fully disassembled for flat storage, depending on the specific model's construction. Stands where the tier brackets attach to the column via removable hardware can be taken apart in a few minutes without tools - remove the swords, detach the tier brackets, separate the column from the base, and the components lay flat for storage. The disassembled pieces can be wrapped in soft cloth to protect the lacquer finish and stored in a box or bag until the display is set up again. For stands with fixed tier construction that do not disassemble, the fully assembled stand is still compact enough to store in a closet or under a bed if it is laid on its side with protective padding on the lacquer surfaces. When reassembling after storage, check that all hardware is secure before placing swords on the stand, and re-verify that the tiers are level on the display surface before beginning the display.
Customer Reviews
Darien Brown
Illinois, United States
Very upset my double tier katana stand was not delivered but the katana are wonderful I just need to mount them.
 |
Handmade Black Wooden Double Tier Katana Stand Holder Display Rack Stand Wall Mount |
Michael Webb
Massachusetts, United States
Two very elegant sword stands - photo shows the double but the single is also excellent. Both pieces are simply constructed of very pleasing wood, assembly was easy and took only a minute or two. I am very happy with both these pieces and would recommend them. They may have been designed for katana, but I use them exclusively for Chinese dao and jian swords, and they are perfect for these.
 |
Handmade Double Chinese Dragon Carving Theme Real Wood Double-layer Sword Stand |
Bruce Gragert
Virginia, United States
Well made and item is advertised. Recommend this to anyone.
 |
Black Wooden Double Tier Sword Stand Katana Samurai Sword Holder |
Stephen J Wild
Wisconsin, United States
Excellent product, came as advertised. Timely shipping, quality packaging.
|
Handmade Double Chinese Dragon Carving Theme Real Wood Double-layer Sword Stand |
Jay Zonne
Minnesota, United States
i like the sword staned . shiping took a wial , but werth the whate. thank you
|
Black Wooden Double Tier Sword Stand Katana Samurai Sword Holder |
Luke Rafijah
California, United States
The stand looked great. It was sturdy. However, it was a bit hard to assemble. The grooves in the wood were not cut properly. I ended up having to sand the grooves by hand in order to fit the pieces into the grooves.
 |
Handmade Double Chinese Dragon Carving Theme Natural Wood Single Sword Stand |
Paul Moua
California, United States
Very nice. Very sharp. All though it's battle ready I have it on display only.
|
Black Wooden Double Tier Sword Stand Katana Samurai Sword Holder |